Source factory & No middleman ！
quartz slab manufacturer in cambodia
138'' x 79'' (3500x2000mm) super jumbo slabs can be produced!
29+ Years
Over 29 years in the quartz stone industry; expertise across residential, commercial, and hospitality projects.
15-Day Delivery
We manufacture slabs and finished countertops in-house, so we can deliver a full 20' container in as little as 15 days.
19% Tariffs
Importing from Cambodia incurs tariffs as low as 19%, lower compared to other countries like India (50%), and Vietnam (20%).
New super jumbo slabs is ready for production.
138” x 79” (3500x2000mm) super jumbo slabs, Available in 20mm and 30mm.
Explore Our Quartz Stone Slab Colors
Available in138” x 79” (3500x2000mm) super jumbo slabs, Available in 20mm and 30mm, Available customized colors.
- Excellent durability and high scratch resistance, suitable for demanding commercial applications.
- Stain-resistant, non-porous surface ideal for hygiene-sensitive environments.
- Available in large slab formats, minimizing joints and installation time.
- Custom sizes, colors, and finishes available to meet project requirements.
- Complies with international environmental and safety standards.
- Stable supply and flexible production capacity for bulk orders.
Do you need a custom color for your project?
Free Color Matched service
Prefab Countertop Solution
Our factory offers over 300+ colors, and custom colors are available based on your samples.
Kitchen Countertops — Calacatta
Countertop: 96"/108"/110" × 25.5"/26"
Sink/cooktop/faucet CNC cutouts; polished edges
Thickness: 20/30 mm; 20+20 mm laminated edge available
Edge: Eased, bevel, 1/4" round; miter waterfall on request
MOQ: 1×20' container (colors mixable) · Samples free
Lead time: 15–25 days
Island Tops — Calacatta White
Islands: 96"/108"/110" × 36"/40"/42"
Book-match/vein-match for long runs & peninsulas
Thickness: 20/30 mm; 40 mm laminated edge optional
Finish: polished / high-gloss; stain & scratch-resistant
4" backsplash and mitered waterfall optional
Lead time: 15–25 days
Vanity Tops — Calacatta White
Vanity tops: 25"/31"/37"/49"/61" × 22"
Undermount or drop-in sink cutouts; bowl area polished
Back/side backsplash options; eased/bevel edges
Thickness: 20/30 mm · 20+20 mm laminated front edge
Consistent color lot control
Lead time: 15–25 days
Calacatta Netted Vein Countertops
Kitchen 96"/108"/110" × 25.5"/26"; Island 36"/40"/42"
Dramatic “netted” vein; book-match pairs available
Thickness: 20/30 mm; edges & cutouts per drawing
Color consistency · Project QC photos before ship
Mix with white/grey SKUs in one container
Lead time: 15–25 days
High-Gloss Pure-White Countertops
Kitchen 96"/108"/110" × 25.5"/26"; Island 36"/40"/42"
Mirror-like high gloss; food-safe & non-porous
Thickness: 20/30 mm; edges & cutouts per drawing
Ideal for retail chains & multifamily refresh programs
Mix with white/grey SKUs in one container
Lead time: 15–25 days
Thickened edge-Black Countertops
Kitchen 96"/108"/110" × 25.5"/26"; Island 36"/40"/42"
Mirror-like high gloss; food-safe & non-porous
Thickness: 20/30 mm; edges & cutouts per drawing
Ideal for retail chains & multifamily refresh programs
Mix with white/grey SKUs in one container
Lead time: 15–25 days
Carrara White Quartz Vanity Tops
Standard sizes: 25"/31"/37"/49"/61" × 22"
Sinks: oval/rectangle undermount; bowl area polished
Faucet holes: 1/4"/8" centers（1–3 holes）
Backsplash: 4" & 8" + side splashes optional
Thickness: 20/30 mm；front 20+20 mm laminated edge optional
Lead time: 15–25 days
Granular Quartz Vanity Tops
Standard sizes: 25"/31"/37"/49"/61" × 22"
Sinks: oval/rectangle undermount; bowl area polished
Faucet holes: 1/4"/8" centers（1–3 holes）
Backsplash: 4" & 8" + side splashes optional
Thickness: 20/30 mm；front 20+20 mm laminated edge optional
Lead time: 15–25 days
Pure White Quartz Vanity Tops
Standard sizes: 25"/31"/37"/49"/61" × 22"
Sinks: oval/rectangle undermount; bowl area polished
Faucet holes: 1/4"/8" centers（1–3 holes）
Backsplash: 4" & 8" + side splashes optional
Thickness: 20/30 mm；front 20+20 mm laminated edge optional
Lead time: 15–25 days
Capacity & Lead Time — Built for Consistent U.S. Supply
Stable monthly output, transparent slot booking, and delivery timelines you can plan around.
Capacity
Monthly capacity: 9000 Big Slabs, 300 Pieces Slab Per Day.
U.S. allocation: 9000 Big Slab / Month (Dedicated).
Booking cadence: weekly slot assignment with progress updates
Packaging and Breakage Rate
Export crates (ISPM-15), corner protectors, anti-vibration lining
Damage rate target: 0.5%
Last quarter actual: 0.38%
Lead Time for 1 x 20ft Container
| Order Type | Lead Time | Notes |
|---|---|---|
| OEM/ODM Orders | 20–30 days | From deposit to ready-to-ship |
| Repeat Orders | 10–20 days | Steady SKUs, standard finishes |
| Peak Seasons | 15–25 days | With early slot reservation |
Packing Details
| Size | Thickness | |||
|---|---|---|---|---|
| 15mm | 18mm | 20mm | 30mm | |
| 2700*1800mm | 120pcs | 105pcs | 96pcs | 60pcs |
| 3000*1400mm | 140pcs | 116pcs | 105pcs | 70pcs |
| 3200*1600mm | 140pcs | 116pcs | 105pcs | 70pcs |
| 3200*1800mm | 120pcs | 105pcs | 96pcs | 60pcs |
| 3500*2000mm | 84pcs | 54pcs | ||
From Order to U.S. Clearance
Order & Slot
PI/PO confirmed, production slot assigned
Manufacturing
mixing → pressing/curing → flatting → polishing
QC & Retain
thickness/flatness, stain resistance, retain-sample & color check
Packing
ISPM-15 wooden crates, corner protectors, labels “Made in Cambodia”
Stuffing
photos with container & seal numbers, stuffing location recorded
Docs & Clearance
CI/PL/CO/BL issued; ISF data provided to broker
Quality & Testing — Consistency You Can Verify
Dimensional control, stain/absorption performance, gloss consistency, and batch-to-batch color matched under D65.
Key Indicators
Thickness tolerance: ±0.5 mm
Flatness: ≤2.0 mm/m
Water absorption: ≤0.02%
Gloss (polished): ≥55 GU (polished)
Color consistency: ΔE ≤1.5 (spectro under D65)
Detailed lab summaries are available below
| Property | Standard (EN) | Test Result |
|---|---|---|
| Water absorption / Apparent density | EN 14617-1:2005 | Water absorption: 0.02% (Class W4); Apparent density: 2340 kg/m³ |
| Flexural strength | EN 14617-2:2008 | 44.4 MPa (Class F4) |
| Compressive strength | EN 14617-15:2005 | 207 MPa |
| Thermal shock resistance | EN 14617-6:2012 | Mass loss: 0.08%; Flexural strength after thermal shock: 36.6 MPa; Strength loss: 17.6% |
| Chemical resistance | EN 14617-10:2012 | Class C4 |
| Abrasion resistance | EN 14617-4:2012 | 21.0 mm (Class A4) |
| Slip resistance (Pendulum tester) | EN 14231:2003 | 53 (Dry) / 16 (Wet) |
| Dimensional stability | EN 14617-12:2012 | Class A; Vertical displacement: 0.06 mm |
| Linear thermal expansion coefficient | EN 14617-11:2005 | 33.9 × 10−6 / °C |
| Impact resistance | EN 14617-9:2005 | 3.67 J |
| Mohs’ hardness | EN 101-1991 | 6 |
| Dimensions, geometric characteristics & surface quality | EN 14617-16:2005 + client’s requirement | Tolerance: see clause 9; Surface quality: No defects |
AQL
Critical: AQL 1.0
Major: AQL 3.0
Minor: AQL 5.0
AQL 1.0 / 3.0 / 5.0 means:
The maximum allowable defect rate for mass-produced products is 1.0% / 3.0% / 5.0% (i.e., no more than 1 / 3 / 5 defective item is allowed in every 100 products).
- If the defect rate found in the sampling inspection is ≤1.0% / ≤3.0% / ≤5.0%, the entire batch is considered acceptable.
- If it exceeds 1.0% / ≤3.0% / ≤5.0%, the batch may be rejected or require rework.
Defects Definition
| Severity | Criteria |
|---|---|
| Critical |
|
| Major |
|
| Minor |
|
Sample Retention and Color Control
- Retain-sample policy: one slab per batch retained for 12 months with labeled batch ID and spectro reading (D65).
- Color control: lightbox D65/6500 K; ΔE measured at 3–5 points per slab; bookmatch SKUs checked pairwise.
Claim SOP
- Window: notify within 7 days of receipt with photos/video and crate labels.
- Evidence: defect photos, affected qty mapping to crate/position, BL & PL copies.
- Resolution: preliminary feedback in 3 business days; remedy by replacement / credit after joint evaluation.
- Damage-in-transit: file within 7 days; include container/seal photos and packing condition.
*Values above are typical targets. Formal acceptance criteria are those on signed PI/contract and the latest QC Summary. Test methods reference EN 14617 series and internal SOPs.
Pricing & Terms — Clear, Predictable, and Built for Volume
Tiered pricing based on volume, specifications, and delivery terms. Formal quotes issued within 12 hours.
Key Factors Affecting Price
- Thickness & finish: 20/30 mm; polished/matte; bookmatch pairs
- Color series: Calacatta/Carrara families aligned to U.S. demand
- Volume: per-color and per-shipment slabs; crate mix policy
- Incoterms & port: FOB Phnom Penh Port or CIF major U.S. ports
- Packaging & services: standard export crates; custom labeling; documentation pack
Terms
| Item | Details |
|---|---|
| Payment |
|
| MOQ | 1 bundle per color (≈ 20–25 slabs) or ≥ 100 m2; sample orders supported |
| Price Validity | 30 days from quote date |
| Incoterms | FOB Phnom Penh Port / CIF US ports |
| Port Surcharges | See CIF mapping (on request) |
| Warranty | 10-year material warranty (commercial) |
200-599 slabs
Best value for steady SKUs
Matte & bookmatch options
Dedicated production slots
Tiered pricing based on volume, specifications, and delivery terms. Formal quotes issued within 12 hours.
About Metitara — Cambodia-based manufacturer
We provide comprehensive US customs documentation, ensuring smooth and hassle-free import for our clients.
Shorts
0:25
0:15
0:11
0:25
0:31
Why U.S. Buyers Prefer to Partner with Us?
Compliance-First Paperwork
Complete COO with matching invoice, packing list, HS/trade docs—clean, accurate, audit-ready.
Ultra-low tariffs
Our quartz factory in Cambodia enables U.S. customers to import directly with ultra-low tariffs, giving them a strong market advantage.
Uncompromising Quality & Consistency
Every product is strictly inspected at each production stage, ensuring top quality. We offer a 10-year warranty and lifetime online technical support for every item.
Stable and reliable production capacity
14 years of manufacturing expertise, accurate delivery dates, ΔE color control, batch traceability, and consistent color for repeat orders.
Simple SOP Process
We will respond within three working days after receiving the application. Following joint evaluation, we will resolve the issue by product replacement or refund.
Find Us In Cambodia
24km Away, No. 41 High Way,Kong Pisei District,Kampong Speu Province,Cambodia
Compliance & U.S. Customs Documentation
Cambodia-origin manufacturing.Complete customs documents.Audit-ready evidence on request.
- Certificate of Origin matches CI/PL/BL; manufacturer in Cambodia
- ISPM-15 compliant crates with visible IPPC stamps
- Container & seal photos before closing; “Made in Cambodia” marks
- Batch-to-batch color control (retain samples, △E checks)
- Low breakage rate with standardized export packaging
FAQ
Can you provide complete documentation to demonstrate Cambodia origin?
Yes. We supply COO and supporting records; additional process evidence is available upon request for audits.
What documents are included for U.S. customs clearance?
Commercial Invoice, Packing List, BL, CO, plus supporting records as needed.
What is the import tariff on quartz slabs from Cambodia to the U.S.?
The tariff is 19%. We focus on the high-end market in the United States, specializing in Cambodian quartz with export rights. Our products are safe and reliable, eliminating the risk of customer anti-dumping concerns.
How do you handle claims?
Standard SOP within 7 days of receipt with photo/video evidence; resolution within 3 working days.
Do you support private label / OEM?
Yes, with color code mapping and marketing asset support.
How do you control batch-to-batch color consistency?
Retain samples, standard lightbox checking, and △E control with documented QC checkpoints.
Contact Us — Start a Conversation with Our Experts
Reach out to us for more than just pricing; discover a committed partner in your success.
Tell us about Your Project
We are committed to protecting your privacy. Our expert team will respond within 12 hours.
We turn complex Into Simple! Follow the following 3 steps to start today!
Step 1 - Tell Us What You Need
Tell us as specific as possible of your needs, provide the drawing, reference picture and share your idea.
Step 2 - Get Solution & Quote
We will work on the best solution according to your requirements and drawing, the specific quote will be provided within 24 hours.
Step 3 - Approve for Mass Production
We will start mass production after getting your approval and deposit, and we will handle the shipment.